4.3. Replicator Database

The _replicator database works like any other in CouchDB, but documents added to it will trigger replications. Create (PUT or POST) a document to start replication. DELETE a replication document to cancel an ongoing replication.

These documents have exactly the same content as the JSON objects we used to POST to _replicate (fields source, target, create_target, continuous, doc_ids, filter, query_params, use_checkpoints, checkpoint_interval).

Replication documents can have a user defined _id (handy for finding a specific replication request later). Design Documents (and _local documents) added to the replicator database are ignored.

The default name of this database is _replicator. The name can be changed in the local.ini configuration, section [replicator], parameter db.

4.3.1. Basics

Let’s say you POST the following document into _replicator:

{
    "_id": "my_rep",
    "source":  "http://myserver.com:5984/foo",
    "target":  "bar",
    "create_target":  true
}

In the couch log you’ll see 2 entries like these:

[Thu, 17 Feb 2011 19:43:59 GMT] [info] [<0.291.0>] Document `my_rep` triggered replication `c0ebe9256695ff083347cbf95f93e280+create_target`
[Thu, 17 Feb 2011 19:44:37 GMT] [info] [<0.124.0>] Replication `c0ebe9256695ff083347cbf95f93e280+create_target` finished (triggered by document `my_rep`)

As soon as the replication is triggered, the document will be updated by CouchDB with 3 new fields:

{
    "_id": "my_rep",
    "source":  "http://myserver.com:5984/foo",
    "target":  "bar",
    "create_target":  true,
    "_replication_id":  "c0ebe9256695ff083347cbf95f93e280",
    "_replication_state":  "triggered",
    "_replication_state_time":  1297974122
}

Special fields set by the replicator start with the prefix _replication_.

  • _replication_id

    The ID internally assigned to the replication. This is also the ID exposed by /_active_tasks.

  • _replication_state

    The current state of the replication.

  • _replication_state_time

    A Unix timestamp (number of seconds since 1 Jan 1970) that tells us when the current replication state (marked in _replication_state) was set.

  • _replication_state_reason

    If replication_state is error, this field contains the reason.

{
"_id": "my_rep",
"_rev": "2-9f2c0d9372f4ee4dc75652ab8f8e7c70",
"source": "foodb",
"target": "bardb",
"_replication_state": "error",
"_replication_state_time": "2013-12-13T18:48:00+01:00",
"_replication_state_reason": "db_not_found: could not open foodb",
"_replication_id": "fe965cdc47b4d5f6c02811d9d351ac3d"
}

When the replication finishes, it will update the _replication_state field (and _replication_state_time) with the value completed, so the document will look like:

{
    "_id": "my_rep",
    "source":  "http://myserver.com:5984/foo",
    "target":  "bar",
    "create_target":  true,
    "_replication_id":  "c0ebe9256695ff083347cbf95f93e280",
    "_replication_state":  "completed",
    "_replication_state_time":  1297974122
}

When an error happens during replication, the _replication_state field is set to error (and _replication_state_reason and _replication_state_time are updated).

When you PUT/POST a document to the _replicator database, CouchDB will attempt to start the replication up to 10 times (configurable under [replicator], parameter max_replication_retry_count). If it fails on the first attempt, it waits 5 seconds before doing a second attempt. If the second attempt fails, it waits 10 seconds before doing a third attempt. If the third attempt fails, it waits 20 seconds before doing a fourth attempt (each attempt doubles the previous wait period). When an attempt fails, the Couch log will show you something like:

[error] [<0.149.0>] Error starting replication `67c1bb92010e7abe35d7d629635f18b6+create_target` (document `my_rep_2`): {db_not_found,<<"could not open http://myserver:5986/foo/">>

Note

The _replication_state field is only set to error when all the attempts were unsuccessful.

There are only 3 possible values for the _replication_state field: triggered, completed and error. Continuous replications never get their state set to completed.

4.3.2. Documents describing the same replication

Lets suppose 2 documents are added to the _replicator database in the following order:

{
    "_id": "doc_A",
    "source":  "http://myserver.com:5984/foo",
    "target":  "bar"
}

and

{
    "_id": "doc_B",
    "source":  "http://myserver.com:5984/foo",
    "target":  "bar"
}

Both describe exactly the same replication (only their _ids differ). In this case document doc_A triggers the replication, getting updated by CouchDB with the fields _replication_state, _replication_state_time and _replication_id, just like it was described before. Document doc_B however, is only updated with one field, the _replication_id so it will look like this:

{
    "_id": "doc_B",
    "source":  "http://myserver.com:5984/foo",
    "target":  "bar",
    "_replication_id":  "c0ebe9256695ff083347cbf95f93e280"
}

While document doc_A will look like this:

{
    "_id": "doc_A",
    "source":  "http://myserver.com:5984/foo",
    "target":  "bar",
    "_replication_id":  "c0ebe9256695ff083347cbf95f93e280",
    "_replication_state":  "triggered",
    "_replication_state_time":  1297974122
}

Note that both document get exactly the same value for the _replication_id field. This way you can identify which documents refer to the same replication - you can for example define a view which maps replication IDs to document IDs.

4.3.3. Canceling replications

To cancel a replication simply DELETE the document which triggered the replication. The Couch log will show you an entry like the following:

[Thu, 17 Feb 2011 20:16:29 GMT] [info] [<0.125.0>] Stopped replication `c0ebe9256695ff083347cbf95f93e280+continuous+create_target` because replication document `doc_A` was deleted

Note

You need to DELETE the document that triggered the replication. DELETE-ing another document that describes the same replication but did not trigger it, will not cancel the replication.

4.3.4. Server restart

When CouchDB is restarted, it checks its _replicator database and restarts any replication that is described by a document that either has its _replication_state field set to triggered or it doesn’t have yet the _replication_state field set.

Note

Continuous replications always have a _replication_state field with the value triggered, therefore they’re always restarted when CouchDB is restarted.

4.3.5. Changing the Replicator Database

Imagine your replicator database (default name is _replicator) has the two following documents that represent pull replications from servers A and B:

{
    "_id": "rep_from_A",
    "source":  "http://aserver.com:5984/foo",
    "target":  "foo_a",
    "continuous":  true,
    "_replication_id":  "c0ebe9256695ff083347cbf95f93e280",
    "_replication_state":  "triggered",
    "_replication_state_time":  1297971311
}
{
    "_id": "rep_from_B",
    "source":  "http://bserver.com:5984/foo",
    "target":  "foo_b",
    "continuous":  true,
    "_replication_id":  "231bb3cf9d48314eaa8d48a9170570d1",
    "_replication_state":  "triggered",
    "_replication_state_time":  1297974122
}

Now without stopping and restarting CouchDB, you change the name of the replicator database to another_replicator_db:

$ curl -X PUT http://localhost:5984/_config/replicator/db -d '"another_replicator_db"'
"_replicator"

As soon as this is done, both pull replications defined before, are stopped. This is explicitly mentioned in CouchDB’s log:

[Fri, 11 Mar 2011 07:44:20 GMT] [info] [<0.104.0>] Stopping all ongoing replications because the replicator database was deleted or changed
[Fri, 11 Mar 2011 07:44:20 GMT] [info] [<0.127.0>] 127.0.0.1 - - PUT /_config/replicator/db 200

Imagine now you add a replication document to the new replicator database named another_replicator_db:

{
    "_id": "rep_from_X",
    "source":  "http://xserver.com:5984/foo",
    "target":  "foo_x",
    "continuous":  true
}

From now own you have a single replication going on in your system: a pull replication pulling from server X. Now you change back the replicator database to the original one _replicator:

$ curl -X PUT http://localhost:5984/_config/replicator/db -d '"_replicator"'
"another_replicator_db"

Immediately after this operation, the replication pulling from server X will be stopped and the replications defined in the _replicator database (pulling from servers A and B) will be resumed.

Changing again the replicator database to another_replicator_db will stop the pull replications pulling from servers A and B, and resume the pull replication pulling from server X.

4.3.6. Replicating the replicator database

Imagine you have in server C a replicator database with the two following pull replication documents in it:

{
     "_id": "rep_from_A",
     "source":  "http://aserver.com:5984/foo",
     "target":  "foo_a",
     "continuous":  true,
     "_replication_id":  "c0ebe9256695ff083347cbf95f93e280",
     "_replication_state":  "triggered",
     "_replication_state_time":  1297971311
}
{
     "_id": "rep_from_B",
     "source":  "http://bserver.com:5984/foo",
     "target":  "foo_b",
     "continuous":  true,
     "_replication_id":  "231bb3cf9d48314eaa8d48a9170570d1",
     "_replication_state":  "triggered",
     "_replication_state_time":  1297974122
}

Now you would like to have the same pull replications going on in server D, that is, you would like to have server D pull replicating from servers A and B. You have two options:

  • Explicitly add two documents to server’s D replicator database
  • Replicate server’s C replicator database into server’s D replicator database

Both alternatives accomplish exactly the same goal.

4.3.7. Delegations

Replication documents can have a custom user_ctx property. This property defines the user context under which a replication runs. For the old way of triggering a replication (POSTing to /_replicate/), this property is not needed. That’s because information about the authenticated user is readily available during the replication, which is not persistent in that case. Now, with the replicator database, the problem is that information about which user is starting a particular replication is only present when the replication document is written. The information in the replication document and the replication itself are persistent, however. This implementation detail implies that in the case of a non-admin user, a user_ctx property containing the user’s name and a subset of their roles must be defined in the replication document. This is enforced by the document update validation function present in the default design document of the replicator database. The validation function also ensures that non-admin users are unable to set the value of the user context’s name property to anything other than their own user name. The same principle applies for roles.

For admins, the user_ctx property is optional, and if it’s missing it defaults to a user context with name null and an empty list of roles, which means design documents won’t be written to local targets. If writing design documents to local targets is desired, the role _admin must be present in the user context’s list of roles.

Also, for admins the user_ctx property can be used to trigger a replication on behalf of another user. This is the user context that will be passed to local target database document validation functions.

Note

The user_ctx property only has effect for local endpoints.

Example delegated replication document:

{
     "_id": "my_rep",
     "source":  "http://bserver.com:5984/foo",
     "target":  "bar",
     "continuous":  true,
     "user_ctx": {
          "name": "joe",
          "roles": ["erlanger", "researcher"]
     }
}

As stated before, the user_ctx property is optional for admins, while being mandatory for regular (non-admin) users. When the roles property of user_ctx is missing, it defaults to the empty list [].